
- NTN BEARING CORP.OF AMERICA
- Ball Bearings Miniatures Ball Screw Support Bearings Deep Groove | Radial Ball Bearings
- Address1600 E. Bishop Court, P.O. Box 7604,Mount Prospect, IL 60056-7604, U.S.A.
- Phone(Working Time)298-5268
Single Row Angular Contact
Contact NowSingle row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. We can preload the bearings at the factory so that the correct load will develop once the bearing is put into service.SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
Single Row Angular Contact Ball Bearings The raceways in these bearings are positioned off-center to handle angular (combined radial and thrust) loads. Single-row bearings handle thrust loads on one side.Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.
40mm x 80mm x 18mm FAG 7208-b-tvp-p5-ul-fag Single Row Angular Contact
1.0000 in | 7/8 in |
Requires Lubrication | 7300 lbf |
40mm x 80mm x 18mm FAG 7208-b-tvp-ua-fag Single Row Angular Contact
3400 lb | Nylon |
5200 | Open |
40mm x 80mm x 18mm FAG 7208-b-tvp-p5-uo-fag Single Row Angular Contact
Double Shielded | C3 |
3800 RPM | 45 mm |
40mm x 80mm x 18mm FAG 7208-b-tvp-p5-fag Single Row Angular Contact
Uncoated | 170 mm |
28 mm | Without Snap Ring |
40mm x 80mm x 18mm SKF 7208becby-skf Single Row Angular Contact
766781 | 2.8125 in |
4000 RPM | 2611 lb |
35mm x 72mm x 17mm FAG 7207-b-tvp-p5-uo-fag Single Row Angular Contact
Cast Steel | Eccentric Collar |
QMMC | Bearing Steel |
3.75 Inch x 8.125 Inch x 1.75 Inch RHP mjt3.3/4-rhp Single Row Angular Contact
9/16 in | 1/16 in |
-15 °F to + | Static 20000 / |
35mm x 72mm x 17mm FAG 7207-b-tvp-ua-fag Single Row Angular Contact
1.0240 in | 3.0625 in |
4.3307 in | Contact with Slinger |
3.75 Inch x 8.125 Inch x 1.75 Inch R%26M mjt3.3/4-r&m Single Row Angular Contact
23224cke4-nsk | 12.10 KGS |
120mm | 1700 |
35mm x 72mm x 17mm FAG 7207-b-tvp-p5-ua-fag Single Row Angular Contact
CT-1000-K26, SAE841 | 848330 |
RoHS, REACH, DRC Con | Sintered Bronze Oil- |
35mm x 72mm x 17mm FAG 7207-b-tvp-p5-ul-fag Single Row Angular Contact
0.01 KGS | 8mm |
Standard | 1.37 |